ISO9001:2000   CERTIFICATION   Products Category Home > Products > Heating & Cooling > Mould Temperature Controller > Water Type > Specification   MOULD TEMPERATURE CONTROLLER     Water Type Mould Temperature Controller Specification   Ordinary Water Type Hi-temp. Water Type   MODEL Heating Capacity kW Temp. Range °C Power Supply Pump Power kW Outlet Pressure Bar Max Flow L/min Cooling Method Molding Connecting Inch   Dimension W mm H mm D mm Weight kg HT-03WS HT-06WS HT-09WS HT-06WH HT-09WH HT-12WH 3 kW 6 kW 9 kW 6 kW 9 kW 12 kW 35 ~100 °C 35 ~120 °C 3N 380V 50Hz 3N 380V 50Hz 3.7 3.7 0.75 3.7 0.75 0.75 2.0 ~ 3.5 2.0 ~ 3.5 2.5 ~ 3.5 2.0 ~ 5.5 2.5 ~ 5.5 2.5 ~ 5.5 50 50 90 50 90 90 Direct Cooling Direct Cooling 1/2" (2 x 2) 1/2" (2 x 2) 330 330 650 650 630 630 45 45 45 50 63 63   Hi-temp. & Hi-press Water Type   MODEL Heating Capacity kW Temp. Range °C Power Supply Pump Power kW Outlet Pressure Bar Max Flow L/min Cooling Method Molding Connecting Inch   Dimension W mm H mm D mm Weight kg HT-06WHP HT-09WHP HT-12WHP 6 kW 9 kW 12 kW 35 ~150 °C 3N 380V 50Hz 0.75 + 0.37 0.75 + 0.37 0.75 + 0.37 2.5 ~ 8.0 2.5 ~ 8.0 2.5 ~ 8.0 50 90 90 Indirect Cooling 1/2" (2 x 2) 350 680 680 60 75 75 Note: Water supply pressure must be more than 2kgf / cm² for Ordinary Water Type and more than 4kgf /cm² for Hi-temp. Water Type (120°C). We reserve the right to make change to the above specification without notification. Copyright© 2009 Hang Tong Industrial Chiller Fty. All rights reserved | Powered by Spritlinks Workshop